Company News
How to find and solve PCB distortion problem quickly
Custom PCB Exporter shares that PCB distortion is a common problem in SMT mass production. The main reasons include: PCB itself raw materials selection is improper, especially paper-based PCB, its processing temperature is...
What are the disassembly and welding skills for SMT proc...
SMT processing components to be removed, generally speaking is not so easy. Constant practice, to master, otherwise, if forced disassembly is easy to destroy SMD components. The mastery of these skills is, of course, a matter of pra...
3. PCB Supplier shares that for components with high pin density, the welding procedure is similar, i.e. first weld one foot and then solder the rest of the feet with tin wire. The number of feet is relatively large and dense, and the ...
SMT Reflow Welding Equipment Selection
PCBA Supplier shares that the solder used in reflow welding is solder paste, pre-printed appropriate amount and appropriate form of solder paste on the solder pad of the circuit board, and then SMT components posted to the correspon...
PCBA Assembly Process Material Incoming Inspection ...
SMT solder paste inspection of the main content of metal content, solder ball, viscosity, metal powder oxide content. Then what materials are tested in PCBA processing and assembly process? The following China PCB Manufactur...
What Is The Principle Of Non - Contact Printing In ...
In SMT Process manufacturing, contactless printing is done with flexible screen templates with a space between the template and the PCB. Below SMT production technicians tell you what is the principle and process of non-contac...
