Company News
What Is The Difference Between a Pcb And An Integra...
To put it simply, integrated circuits are a general circuit integrated into a chip, which is a whole. Once it is damaged internally, the chip is also damaged, and the PCB can solder components by itself, and can be replaced if it is br...
Requirements for PCB surface coating (plating)
In order to ensure that the copper surface of the solder pad on the PCB is not oxidized and polluted before soldering, electric circuit board must be protected by a surface coating (plating) coating.
Four basic characteristics of PCB RF circuit(on)
Here we will interpret the four basic characteristics of the RF circuit from the four aspects of the RF interface.
RF circuit PCB design processing skills(below)
All of these require designers to have certain practical experience and engineering design capabilities, but to have these capabilities, each designer in PCB fabrication factory cannot be achieved overnight.
RF circuit PCB design processing skills(on)
Because the radio frequency (RF) circuit is a distributed parameter circuit, it is easy to produce skin effects and coupling effects in the actual work of the circuit.
PCB impedance control
Without impedance control, considerable signal reflections and signal distortions can result, leading to design failure. Common signals, such as the PCI bus, PCI-E bus, USB, Ethernet, DDR memory, and LVDS signals, need t...
